网纹保护膜
Reticulate Protection Film
一、构成Structure
此类保护膜是以PET(聚酯薄膜)或BOPP为基材，单面经特殊工艺涂布亚克力胶水而成。
This kind of film is based on PET or BOPP film as the substrate, single side coated with acrlic adhesive,
Regularly Netted on surface of the product.
二、产品特点Features
1）可以非常容易的从被贴物表面撕离，且不会破坏被贴物；
This kind of film can be easily peeled off and will not damage the surface.
2）贴合时可以非常容易的排出气泡。
The surface can be easily air-out while using this film.
三、应用领域Application
1）各类薄膜、胶带的模切垫底及排废；
This film can be used as the carrier and removing of the waste during die-cutting of PET film or tapes.
2）各类塑料机壳等塑胶件保护；
A surface protection of plastics product.
3）产品运输过程中的表面保护。
A surface protection of the product during transport.
四、产品型号及性能参数Grades & Specification
| 常规出货规格（宽*长度） | 1240mm * 200m | |||||||||||||||||||||||||||
| 产品型号 Item No. | 性能参数 Specification | |||||||||||||||||||||||||||
|
基材厚度（mm) Backing thickness |
基材材质 material |
胶系 Adhesive type |
胶厚（mm) ±0.002mm |
总厚(mm) Total thickness |
离型膜厚（mm) Release liner |
剥离力（g/25mm) Strength of Adhesion |
||||||||||||||||||||||
| BWB6001 | 0.060 | BOPP | 亚克力 Acrylic | 0.003 | 0.063 | / | 2-6 | |||||||||||||||||||||
| BWB7001 | 0.070 | BOPP | 亚克力 Acrylic | 0.002 | 0.072 | / | 2-6 | |||||||||||||||||||||
| TWB5001 | 0.050 | PET | 亚克力 Acrylic | 0.002 | 0.052 | / | 2-5 | |||||||||||||||||||||
| TWB5101 | 0.050 | PET | 亚克力 Acrylic | 0.004 | 0.054 | / | 1-3 | |||||||||||||||||||||
| TWB5201 | 0.050 | PET | 亚克力 Acrylic | 0.002 | 0.052 | / | ＜2 | |||||||||||||||||||||
| TWB7501 | 0.075 | PET | 亚克力 Acrylic | 0.002 | 0.077 | / | 1-3 | |||||||||||||||||||||
| TWB7601 | 0.075 | PET | 亚克力 Acrylic | 0.004 | 0.079 | / | 1-3 | |||||||||||||||||||||
| TWA5010L-50P | 0.050 | PET | 亚克力 Acrylic | 0.003 | 0.053 | 0.050 | 6-14 | |||||||||||||||||||||
* 备注: 以上记载的数据均在实验室标准条件下测试所得，所有测试数据并非保证值，仅供参考
This document is only for internal reference， We do not undertake any responsibility due to reprint or circulate.